Introduction
LG washers are known for their reliability and high-quality performance. However, like any other appliance, they can experience problems that require troubleshooting. One common problem is when a LG washer won’t spin, leaving wet and heavy clothes at the end of the cycle. To fix this issue, you’ll need to identify the root cause and take the appropriate steps to get your washer to spin only.
Troubleshoot the Washer to Identify the Problem
The first step in resolving the issue is to troubleshoot the washer to identify the problem. This involves checking for loose connections, testing the lid switch, analyzing the washer’s spin cycle, and more.
Check for Loose Connections
Before anything else, you should make sure all the hoses and electrical connections are properly connected. If any of them are loose, the washer won’t be able to spin correctly.
Test the Lid Switch
If the washer won’t spin, you should also check the lid switch. This is located inside the washer and is responsible for starting and stopping the spinning cycle. If it is defective or not working properly, the washer won’t spin.
Analyze the Washer’s Spin Cycle
If the lid switch is functioning properly, you should analyze the washer’s spin cycle to determine the problem. Check to see if the washer is spinning too slowly or not at all. Also, look for any signs of wear and tear on the internal components.
Clean the Tub and Drain Hose
Another possible cause of a washer not spinning correctly is a clogged drain hose or a dirty tub. In order to resolve this issue, you’ll need to clean out the tub and unclog the drain hose.
Clean Out the Tub
To clean out the tub, you’ll need to remove any debris or buildup that could be preventing the washer from spinning correctly. Use a brush or vacuum cleaner to get rid of any dirt and grime.
Unclog the Drain Hose
The next step is to unclog the drain hose. Over time, lint and other debris can accumulate and block the hose, preventing the washer from spinning. To clear the clog, use a plumber’s snake or a shop vac.
Check the Water Pressure
If the tub and drain hose are clean and free of debris, the next step is to check the water pressure. Low water pressure can prevent the washer from spinning correctly.
Make Sure the Pressure is Adequate
First, make sure the water pressure is adequate. You can do this by turning on the faucet and checking the water flow. If the water pressure is low, you may need to adjust the pressure valve or call a plumber.
Check the Inlet Valve
Next, you should also check the inlet valve. This is located behind the washer and is responsible for regulating the water flow. If it is damaged or not working properly, the washer won’t spin.
Verify the Load Size is Appropriate
A too-large load can also prevent the washer from spinning correctly. To ensure the load size is appropriate, you’ll need to be aware of the maximum capacity and balance out the load.
Be Aware of Maximum Capacity
Every washer has a maximum capacity, which is usually indicated on the inside of the machine. Make sure you don’t exceed this limit, as this can cause the washer to spin incorrectly.
Balance Out the Load
You should also balance out the load. A too-uneven load can cause the washer to become unbalanced, resulting in the washer not spinning correctly. To avoid this, try to evenly distribute the items in the washer.
Check the Suspension Rods and Springs
If all the above steps have been taken and the washer still won’t spin, then you should inspect the suspension rods and springs. These parts are responsible for keeping the washer balanced during the spin cycle.
Inspect the Suspension Rods
The suspension rods should be inspected for any signs of damage or corrosion. If the rods are damaged or corroded, they will need to be replaced.
Replace the Springs if Necessary
The springs should also be checked and replaced if necessary. The springs are responsible for keeping the washer balanced during the spin cycle and if they are worn or broken, the washer won’t spin correctly.
Replace the Drive Motor or Belt if Necessary
If the suspension rods and springs are in good condition, then you may need to replace the drive motor or belt. This is a complex process that requires detailed instructions, so you should consult a professional before attempting it.
Understand the Different Parts Involved
Before replacing the drive motor or belt, you should familiarize yourself with the different parts involved. This includes the drive motor, belt, pulley, and other components.
Take Safety Precautions
When replacing the drive motor or belt, you should take safety precautions. Wear protective gear such as goggles and gloves, and make sure there is no power running to the washer.
Follow Detailed Instructions
Finally, make sure you follow detailed instructions when replacing the drive motor or belt. This will help ensure the job is done correctly and safely.
Conclusion
Getting a LG washer to spin only can be a difficult task, but it is possible. The first step is to troubleshoot the washer to identify the problem. Then, you should clean the tub and drain hose, check the water pressure, and verify the load size is appropriate. If all else fails, you may need to replace the drive motor or belt. By following these steps, you should be able to get your LG washer to spin only.
