Introduction
Front load washers are a popular choice for many households as they are known for their energy efficiency. However, these types of washers require extra care and attention to ensure that they remain clean and in good working order. This article will explore how to properly clean a front load washer in order to maintain it in top condition.
Use a Cleaning Cycle
The first step in cleaning a front load washer is to run a cleaning cycle. This will help remove any built-up dirt and grime from the inside of the machine. To do this, fill the washer’s drum with hot water and add a cup of liquid chlorine bleach. Then select the hottest setting available and start the cleaning cycle. Once the cycle is finished, run a second rinse and spin cycle to ensure all of the bleach has been removed.
Run a Rinse and Spin Cycle with White Vinegar
After completing the cleaning cycle, it is important to run a rinse and spin cycle with white vinegar. White vinegar is a natural disinfectant and can help remove any remaining dirt or grime from the interior of the washer. To do this, simply fill the drum with hot water and add two cups of white vinegar. Start the rinse and spin cycle and let the machine work its magic.
Remove and Clean the Detergent Dispenser
The detergent dispenser should also be removed and cleaned regularly. This is especially important if you use powdered detergents as they can leave residue behind. To clean the dispenser, simply remove it from the washer and soak it in hot, soapy water. Once it has soaked for a few minutes, use a soft cloth to scrub away any residue. Rinse the dispenser thoroughly before reattaching it to the washer.
Wipe Down the Door Seal
The door seal should also be wiped down with a damp cloth every few months. This will help prevent build-up of lint and other debris which can cause mold and mildew to grow. Simply dampen a soft cloth with warm water and wipe down the entire door seal. Make sure to get into all the crevices and around the edges of the seal.
Scrub Away Stains on the Inside Drum
Over time, the inside drum of your washer may become stained due to dirt and grime build up. To remove these stains, mix together equal parts baking soda and white vinegar and apply the mixture to the stained areas. Let the mixture sit for several minutes before scrubbing away the stains with a soft cloth or non-abrasive sponge. Rinse the drum thoroughly after scrubbing.
Clean the Filter
Your washer’s filter should also be cleaned regularly to remove any lint or other debris. To do this, simply remove the filter from the back of the washer and soak it in hot, soapy water. After soaking, use a soft brush to scrub away any remaining dirt or debris. Rinse the filter thoroughly before reattaching it to the washer.
Leave the Door Open to Allow Air Circulation
Finally, it is important to leave the door of your washer open when not in use. This will allow air to circulate inside the machine, helping to keep it fresh and free of moisture. Leaving the door open will also help reduce the chances of mold and mildew growing inside the washer.
Conclusion
Cleaning a front load washer is essential in order to ensure that it remains in good working order. By following the steps outlined above, you can easily keep your washer clean and free of any dirt or grime. Regularly cleaning and maintaining your washer will not only extend its life, but it will also help reduce energy costs and improve the performance of your machine.
