Introduction
A dryer is an essential appliance for many households, so when it stops working properly, it can be very frustrating. If your dryer won’t start, there are several potential causes of the problem. Fortunately, most of these issues can be easily identified and fixed without professional help. This article will provide step-by-step instructions on how to troubleshoot and fix a dryer that won’t start.
Troubleshoot Electrical Supply of the Dryer
The first step in troubleshooting a dryer that won’t start is to check the electrical supply. Unplug the dryer from the wall outlet, then check the circuit breaker and fuses. Make sure they are not tripped or blown. Then check the wiring and connections to make sure they are secure and free of corrosion.
Check the Door Switch and Start Button
If the electrical supply is functioning properly, the next step is to check the door switch and start button. The door switch is located on the inside of the dryer, and it must be closed for the dryer to start. Locate and inspect the switch for any signs of damage. If everything looks okay, test the switch by pressing it with a screwdriver. If the switch is functioning properly, you should hear a clicking sound.
Inspect the Thermal Fuse
The thermal fuse is a safety device that shuts off the dryer if it overheats. Identify the thermal fuse, usually located near the blower housing, and check it for any signs of damage. If everything looks okay, test the thermal fuse with a multimeter. If the fuse has blown, replace it with a new one.
Replace the Drive Belt
The drive belt is a rubber belt that connects the motor to the drum. If the drive belt is worn or broken, the dryer won’t start. To replace the drive belt, first remove the old belt by loosening the screws on the front panel. Then install the new belt, making sure it is tight and secure. Reassemble the dryer and test it to make sure the new belt is working properly.
Clean the Lint Filter
The lint filter should also be checked if the dryer won’t start. Remove the lint filter and clean it with a vacuum cleaner or brush. Make sure all lint and debris have been removed before replacing the filter. This will ensure that the dryer is running efficiently.
Conclusion
By following the steps outlined above, you should be able to troubleshoot and fix a dryer that won’t start. Start by checking the electrical supply, then move on to the door switch and start button, thermal fuse, drive belt, and lint filter. With a little patience and some basic DIY skills, you can get your dryer up and running again in no time.
In summary, troubleshooting and repairing a dryer that won’t start involves checking the electrical supply, door switch and start button, thermal fuse, drive belt, and lint filter. With a little effort, you can easily diagnose and fix the problem yourself.
