Introduction
Accidentally getting water inside your phone’s speaker can be a real headache. Not only can it damage the device, but it can also produce distorted sound when playing music or watching videos. To help you get back on track and enjoy clear sound once again, we have compiled this comprehensive guide on how to get water out of your phone speaker.
Use a Vacuum Cleaner
Using a vacuum cleaner is one of the most effective ways to get water out of your phone’s speaker. This method works best if your phone is still working and you can access the speaker. To start, make sure your vacuum cleaner has a hose attachment and turn the power on low. Then, place the nozzle of the vacuum cleaner over the speaker grill and wait for about 10 seconds. The vacuum will suck out any water trapped inside the speaker.
The benefits of using a vacuum cleaner are that it is relatively easy to do, requires minimal effort, and can be done in less than a minute. Plus, it is a great way to remove water from other areas of your phone as well, such as the headphone jack, charging port, and other crevices.
Use a Can of Compressed Air
If you have a can of compressed air lying around, then you can use it to get water out of your phone’s speaker. Start by making sure the can is upright and shake it thoroughly before use. Then, hold the can upright and press down on the trigger. Aim the nozzle at the speaker grill and spray for a few seconds. The compressed air will push out any water that is trapped in the speaker.
The benefits of using compressed air are that it is easy to use and can be done quickly. It is also more effective than using a vacuum cleaner since the air is more powerful and can reach deeper into the speaker. Plus, it is a great way to clean out other areas of your phone as well.
Use a Hair Dryer on Low Heat Setting
If you don’t have a vacuum cleaner or compressed air, you can also try using a hair dryer on a low heat setting to get water out of your phone’s speaker. Start by turning the hair dryer on the lowest heat setting and aim the nozzle at the speaker grill. Move the nozzle around in a circular motion for a few minutes until all the water is gone. Make sure not to hold the hair dryer too close or keep it on for too long, as this could damage the speaker.
The benefits of using a hair dryer are that it is quick and easy to do. Plus, it is a great way to dry out other areas of your phone as well. However, be sure to use a low heat setting, as high temperatures can damage the speaker.
Use an Absorbent Cloth
If the above methods don’t work, you can also try using an absorbent cloth to get water out of your phone’s speaker. Start by dampening the cloth with a small amount of water and then wringing it out so that it is slightly damp. Place the cloth over the speaker grill and press down firmly. Wait a few minutes and then lift the cloth off. The cloth should have absorbed any water that was trapped inside the speaker.
The benefit of using an absorbent cloth is that it is easy to do and doesn’t require any special tools. Plus, it can help soak up any water that is left behind after using the other methods.
Turn the Phone Upside Down and Shake It Out
If all else fails, you can try turning your phone upside down and shaking it out. Start by holding the phone upside down and gently shaking it for a few seconds. This should help dislodge any water that is trapped inside the speaker. Be sure not to shake too hard, as this could damage the phone.
The benefit of shaking out your phone is that it is easy to do and doesn’t require any special tools. However, it may not be as effective as some of the other methods mentioned above.
Bring It to a Professional Repair Shop
If none of the above methods work, then your best bet is to bring your phone to a professional repair shop. They can open up the phone and inspect the speaker for any water damage. If there is water inside, they can use specialized tools to remove it safely. This is usually the most expensive option, but it is the most reliable way to ensure that your phone is safe and free of water damage.
The benefit of bringing your phone to a professional is that you can trust that the job will be done correctly and efficiently. Plus, they can also check for any other damage that may have been caused by the water.
Conclusion
Getting water out of your phone’s speaker can be a difficult task, but it is possible. With the right tools and techniques, you can get rid of the water and get back to enjoying clear sound. Hopefully, this guide has provided you with the information you need to successfully get water out of your phone’s speaker.
