Introduction
Sewing a zipper into a pillow can be a great way to add a unique touch to a homemade pillow. It can also provide a secure closure for a pillow that needs to be filled or refilled with stuffing. Whether you are a beginner or an experienced sewer, learning how to sew a zipper into a pillow is a useful skill.
Before beginning, it’s important to understand the basics of sewing a zipper into a pillow. There are two types of zippers: lined and unlined. Lined zippers are more secure and are typically used when the pillow will be filled with stuffing. Unlined zippers are easier to install but may not be as secure. The type of zipper you choose will depend on the desired look and function of your pillow.
Step-by-Step Guide to Sewing a Zipper in a Pillow
Follow these steps to learn how to sew a zipper into a pillow:
Gather Supplies
Before getting started, make sure you have the following supplies:
- Fabric for the pillow cover
- A zipper
- Matching thread
- Sewing machine (optional)
- Hand sewing needle
- Pins
- Scissors
- Tape measure
Mark the Position of the Zipper
Once you have gathered the necessary supplies, mark the position of the zipper on the fabric. Make sure the zipper is centered and aligned properly. To ensure accuracy, use a ruler or tape measure to make sure the zipper is placed at the same distance from the edges of the fabric on both sides.
Attach the Zipper to the Fabric
Once the zipper is marked, pin it in place. Use a hand sewing needle to attach the zipper to the fabric using small, even stitches. Be careful not to pull the fabric too tight, as this can cause puckering. Once the zipper is attached, remove the pins.
Sew the Zipper to the Pillow
Using a sewing machine, stitch the zipper onto the pillow. Start at one end and sew slowly, taking care to make sure the stitches are even and straight. When you reach the other end, backstitch to secure the stitches. Trim any loose threads and you’re done!
How to Add a Zipper to Your Pillow Without Breaking a Sweat
Installing a zipper on a pillow doesn’t have to be difficult. Here are some tips to make the process easier:
Choose a Zipper That Match Your Pillow
When selecting a zipper, choose one that matches the fabric of your pillow. If you’re using a patterned fabric, opt for a zipper in a coordinating color. This will help the zipper blend in and give your pillow a finished look.
Use an Invisible Zipper
If you want a clean, seamless look, an invisible zipper is the way to go. Invisible zippers are easy to install and don’t require any special tools. They’re also less bulky than regular zippers, so they won’t take away from the overall look of the pillow.
Make Sure You Have the Right Tools
Having the right tools is key to successful pillow zipper installation. Make sure you have a good quality zipper, thread, needles, and scissors. A seam ripper can also come in handy if you make a mistake.
The Basics of Sewing a Zipper into a Pillow
Sewing a zipper into a pillow can seem intimidating, but it’s actually quite simple. Here’s a quick overview of the steps involved:
Measure the Zipper
Measure the length of the zipper to make sure it’s the correct size for your pillow. You want the zipper to fit snugly, but not be too tight.
Cut the Slits in the Pillow Fabric
Using a pair of scissors, cut two small slits in the fabric of the pillow, one on each side of where the zipper will be sewn. These slits will allow you to easily insert the zipper.
Pin the Zipper in Place
Pin the zipper in place on the fabric, making sure it’s aligned correctly. This will help keep the zipper in place while you sew.
Sew the Zipper onto the Pillow
Using a sewing machine, stitch the zipper onto the pillow. Start at one end and sew slowly, taking care to make sure the stitches are even and straight. When you reach the other end, backstitch to secure the stitches.
Finish the Pillow with a Clean Edge
Once the zipper is installed, finish the pillow with a clean edge. Use a serger or overlock stitch to give the pillow a neat, polished look.
A Beginner’s Guide to Installing a Zipper on a Pillow
If you’re new to sewing, installing a zipper on a pillow can seem daunting. But with a little practice, you’ll be a pro in no time. Here are some tips for beginners:
Learn the Basics of Hand Sewing
Before attempting to install a zipper on a pillow, brush up on your hand sewing skills. Practice sewing straight lines and different types of stitches, such as a running stitch or whip stitch.
Practice Sewing Straight Lines
When installing a zipper, it’s important to make sure the stitches are even and straight. Practice sewing straight lines on scrap fabric before tackling the actual pillow.
Understand the Difference Between a Lined and Unlined Zipper
Knowing the difference between a lined and unlined zipper will help you decide which type of zipper is best for your project. Lined zippers are more secure and are typically used when the pillow will be filled with stuffing. Unlined zippers are easier to install but may not be as secure.
Test Out Different Stitches
Try out different stitches to find the one that works best for you. Different fabrics may require different types of stitches. Experimenting with different stitches will help you find the one that gives you the best results.
Sewing 101: Installing a Zipper in a Pillow
Adding a zipper to a pillow can be a fun and creative way to customize a pillow. Here’s what you need to know:
Choose the Right Size Zipper
Make sure the zipper is the right size for your pillow. Too small and it won’t fit; too large and it will be bulky and unsightly. Measure the length of the zipper to make sure it’s the correct size.
Prepare the Pillow for the Zipper
Before attaching the zipper, cut two small slits in the fabric of the pillow, one on each side of where the zipper will be sewn. This will make it easier to insert the zipper.
Sew the Zipper onto the Pillow
Using a sewing machine, stitch the zipper onto the pillow. Start at one end and sew slowly, taking care to make sure the stitches are even and straight. When you reach the other end, backstitch to secure the stitches.
Finish the Pillow with a Clean Edge
Once the zipper is installed, finish the pillow with a clean edge. Use a serger or overlock stitch to give the pillow a neat, polished look.
Create a Custom Pillow with a Zipper – It’s Easier Than You Think!
Creating a custom pillow with a zipper is a great way to add a personalized touch to any room. Here’s how to do it:
Determine the Placement of the Zipper
Before attaching the zipper, determine where it should be placed on the pillow. You want the zipper to be centered and aligned properly. Use a ruler or tape measure to make sure the zipper is placed at the same distance from the edges of the fabric on both sides.
Prepare the Pillow Cover for the Zipper
Cut two small slits in the fabric of the pillow, one on each side of where the zipper will be sewn. This will make it easier to insert the zipper.
Install the Zipper with a Sewing Machine
Pin the zipper in place on the fabric, making sure it’s aligned correctly. Then, using a sewing machine, stitch the zipper onto the pillow. Start at one end and sew slowly, taking care to make sure the stitches are even and straight. When you reach the other end, backstitch to secure the stitches.
Finish the Pillow with a Clean Edge
Once the zipper is installed, finish the pillow with a clean edge. Use a serger or overlock stitch to give the pillow a neat, polished look.
Conclusion
Learning how to sew a zipper into a pillow is a great way to add a unique touch to a homemade pillow. With the right supplies and a little patience, anyone can master the art of sewing a zipper. Follow these steps and you’ll be able to create beautiful, custom pillows in no time.
